No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro E9000 Server iBMC (V250 to V259) User Guide 19

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Weak Password Check State (weakpwddic)

Setting Weak Password Check State (weakpwddic)


The weakpwddic command can be used to enable or disable weak password check.

The password in the weak password dictionary cannot be used as any of the following:
  • Local user password
  • SNMPv1/v2c read-only or read/write community name
  • SNMPv3 encryption password


ipmcset -t user -d weakpwddic -v <enabled | disabled>


Parameter Description Value

Enables weak password check.


Disables weak password check.

Usage Guidelines

This command is available only for V5 servers.


# Enable weak password check.

iBMC:/-> ipmcset -t user -d weakpwddic -v enabled
Enable weak password dictionary check successfully.
Updated: 2019-08-01

Document ID: EDOC1000157052

Views: 132692

Downloads: 259

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next