No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro E9000 Server iBMC (V250 to V259) User Guide 19

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Accessing the iBMC CLI

Accessing the iBMC CLI

You can log in to the iBMC CLI using any of the following methods:

  • SSH

    Secure Shell (SSH) is a network protocol that allows data to be exchanged over a secure channel between two computers. A maximum of five users can access the iBMC CLI over SSH at the same time.

    NOTE:
    SSH supports AES128-CTR, AES192-CTR, and AES256-CTR encryption algorithms. Use an appropriate encryption algorithm when accessing the iBMC over SSH.
  • Local serial port

NOTE:
  • The default iBMC user is root for V3 servers, and the default password is Huawei12#$. The default user is Administrator for V5 servers and the default password is Admin@9000.
  • The system locks a user account if the user enters incorrect passwords for consecutive five times. The user account is automatically unlocked five minutes later. The administrator can also unlock the user account using the command line.
  • For security purposes, change the initial password upon the first login and change your password periodically.
  • The default operation timeout period on the CLI is 15 minutes.

Prerequisites

  • To open the CLI over the network port, you must connect the network interface of the configuration terminal to the network interface of the server by using a network cable, and ensure that the IP addresses of the two network interfaces are on the same network segment.

  • Before accessing the iBMC CLI through the serial port, use a serial cable to connect the serial port of the configuration terminal to the serial port of the server by using a serial cable.

Accessing the iBMC CLI over SSH

  1. Download an SSH communication tool on the local PC.
  2. Connect the local PC to the server management network port directly or over the network.
  3. Configure an IP address for the local PC to enable communication between the local PC and the iBMC management network port.
  4. On the local PC, use the SSH tool to connect to the iBMC.
  5. Enter the user name and password to access the iBMC.
NOTE:
  • Both local and LDAP users can access the iBMC CLI over SSH. The LDAP user can access the iBMC CLI without entering the domain server information.

  • Before logging in to the iBMC CLI as an LDAP user, ensure that the connection between the iBMC and the LDAP server is normal.

Accessing the iBMC CLI over the Serial Port

  • Before accessing the iBMC CLI over the serial port, ensure that the system serial port of the chassis is switched to the iBMC serial port. You can switch over the serial port by using the serialdir command on the CLI or using a jumper (see the user guide of the server).
  • You can access the iBMC of an E9000 server through the serial port provided by the multi-port cable.

  1. Connect the local PC and the server using a serial cable.
  2. Open HyperTerminal and set the following parameters:

    • Bits per second: 115200

    • Data bits: 8

    • Parity: None

    • Stop bits: 1

    • Flow control: None

    For details on how to set the parameters, see Figure 4-10.

    Figure 4-10 HyperTerminal properties

  3. Click Apply.
  4. Enter the user name and password to access the CLI.
Translation
Download
Updated: 2019-08-01

Document ID: EDOC1000157052

Views: 133397

Downloads: 259

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next