No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro E9000 Server iBMC (V250 to V259) User Guide 20

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting SOL Session Timeout Period (sol -d timeout)

Setting SOL Session Timeout Period (sol -d timeout)


The sol -d timeout command is used to set the timeout period for SOL sessions. If no operation is performed within the specified timeout period, the SOL session will be automatically disconnected and the iBMC CLI is displayed.


ipmcset -t sol -d timeout -v <value>






Maximum idle time (in minutes) after the last operation on the SOL session. If no operation is performed within the specified time, the SOL session will be automatically disconnected.

Value range: 0 to 480

The value 0 indicates unlimited time.

Default value: 15

Usage Guidelines

Only iBMC V256 and later versions support this command.

The switch module does not support the command.


# Set the SOL session timeout period to 20 minutes.

iBMC:/->ipmcset -t sol -d timeout -v 20
Set SOL timeout period successfully. 
Updated: 2019-11-19

Document ID: EDOC1000157052

Views: 153063

Downloads: 287

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next