No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro E9000 Server iBMC (V250 to V259) User Guide 20

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Upgrading the PCIe Switch2 Chip Firmware (pcieswitch2upgrade)

Upgrading the PCIe Switch2 Chip Firmware (pcieswitch2upgrade)


The pcieswitch2upgrade command is used to upgrade the PCIe switch2 chip firmware. This command applies only to the CH220 V3.


ipmcset -d pcieswitch2upgrade -v <filepath>


Parameter Description Value
filepath Specifies the absolute path to the upgrade file. For example, /tmp/Tecal_CH220_V3–SW2FW-V009.bin.

Usage Guidelines

Before running this command, use a file transfer tool that supports SFTP, for example WinSCP, to transfer the upgrade file to the specified directory (for example /tmp) of the iBMC file system.


# Upgrade the PCIe Switch2 chip firmware.

iBMC:/->ipmcset -d pcieswitch2upgrade -v /tmp/Tecal_CH220_V3–SW2FW-V009.bin
Update pcie switch2 configuration file successfully.
Updated: 2019-11-19

Document ID: EDOC1000157052

Views: 153064

Downloads: 287

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next