No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro E9000 Server iBMC (V250 to V259) User Guide 19

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Changing the iBMC Password on the BIOS

Changing the iBMC Password on the BIOS

  • The default BIOS password of V3 servers is Huawei12#$, and Admin@9000 for V5 servers.
  • On the BIOS, you can change only the password of the default iBMC user. The default iBMC user name is root, and default password is Huawei12#$ for V3 servers. The default iBMC user name is Administrator, and default password is Admin@9000 for V5 servers.
  • The password of the default iBMC user specified on the BIOS can contain a maximum of 16 characters.

  • For security purposes, change the initial password upon the first login, and change your password periodically.
  • If OS User Management is disabled on the page displayed after you choose Configuration > System in the iBMC WebUI and the value of BMC User Name is displayed as NA on the Server Mgmt screen of the BIOS, you cannot change the password of the default iBMC user on the BIOS.

Operations for Grantley Platform

The BIOS screen varies depending on the server platform. This section uses the BIOS based on the Grantley platform as an example.

  1. Restart the server.
  2. During the startup process, press Delete repeatedly when the following screen is displayed.

    Figure 4-1 BIOS startup screen

  3. Enter the BIOS password as prompted.

    Figure 4-2 Entering the password

    The BIOS Setup Utility screen is displayed, as shown in Figure 4-3.

    Figure 4-3 BIOS main screen

  4. Use arrow keys to select Advanced.

    The Advanced screen is displayed, as shown in Figure 4-4.
    Figure 4-4 Advanced screen

  5. On the Advanced screen, select IPMI iBMC Configuration using arrow keys and press Enter.

    The IPMI iBMC Configuration screen is displayed, as shown in Figure 4-5.
    Figure 4-5 IPMI iBMC Configuration screen

  6. On the IPMI iBMC Configuration screen, select iBMC Configuration using arrow keys and press Enter.

    The iBMC Configuration screen is displayed, as shown in Figure 4-6.

    Figure 4-6 iBMC Configuration screen

  7. Select Reset iBMC User Password and press Enter.

    The Reset iBMC User Password dialog box is displayed.

  8. Enter the new password and press Enter.

    The password must meet the following requirements:

    • If password complexity check is disabled, the password cannot be empty or exceed 20 characters.
    • If password complexity check is enabled, the password must meet the following requirements:

      • Contain 8 to 20 characters
      • Contain at least a space or one of the following special characters:

        `~!@#$%^&*()-_=+\|[{}];:'",<.>/?

      • Contain at least two types of the following characters:

        • Uppercase letters A to Z
        • Lowercase letters a to z
        • Digits 0 to 9
      • Cannot be the same as the user name or the user name in reverse order.
      • Have at least two new characters when compared with the previous password.
    • If weak password check is enabled, the password cannot be the same as the passwords contained in the weak password dictionary. (You can run the ipmcset -t user -d weakpwddic -v export command to export the weak passwords from the weak password dictionary.)
      NOTE:
      • Weak password check is not supported by V3 servers.

      • The default password Admin@9000 of the V5 servers is in the weak password dictionary.

  9. Enter the password again for confirmation and press Enter.

    The Changes have been saved dialog box is displayed.

  10. Press Enter.

    The password is changed successfully.

Translation
Download
Updated: 2019-08-01

Document ID: EDOC1000157052

Views: 133520

Downloads: 259

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next