No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

E9000 Server Compute Node and Switch Module iBMC (V250 to V259) User Guide 18

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Boot Device

Boot Device

Function Description

The Boot Device page allows you to set the first boot device for the OS on the server.

GUI

Choose Configuration from the main menu, and select Boot Device from the navigation tree.

The Boot Device page is displayed.



Parameter Description

Table 3-53 Parameters on the Boot Device page

Parameter

Description

Boot Mode Changeover

Indicates whether the boot mode can be changed over.

Click or , and click Save.

  • : The boot mode can be changed over. The boot mode set on the iBMC will be applied.
  • : The boot mode cannot be changed over. The boot mode set on the BIOS will be applied.
NOTE:
  • The Boot Mode Changeover button is only available for V5 products.
  • Common users are not authorized to switch between boot modes.

Boot Mode

  • Legacy BIOS: The OS starts from the BIOS.
  • UEFI: The OS starts from the Unified Extensible Firmware Interface (UEFI).
NOTE:

The Boot Mode parameter is only available for V5 servers.

Effective

  • One-time: The boot device is only used for booting the next time the server is restarted.
  • Permanent: The boot option setting takes effect permanently.

Boot Medium

Hard Drive: Click this option to boot the OS from the hard drive.

DVD-ROM: Click this option to boot the OS from the CD-ROM or DVD-ROM drive.

FDD/Removable Device: Click this option to boot the OS from a virtual floppy disk drive (FDD) or removable device.

PXE: Click this option to boot the OS from the Preboot Execution Environment (PXE).

BIOS Setup: Click this option to display the BIOS Setup menu upon server startup.

No Override: Click this option to boot the OS from the default first boot device specified on the BIOS.

Procedure

  1. On the menu bar, choose Configuration.
  2. In the navigation tree, choose Boot Device.

    The Boot Device page is displayed.

  3. Set the first boot option. For details about the options, see Table 3-53.
  4. Click Save.

    If the message "Save Success" is displayed, the setting is successful.

Translation
Download
Updated: 2019-06-04

Document ID: EDOC1000157052

Views: 108753

Downloads: 237

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next