No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro E9000 Server iBMC (V250 to V259) User Guide 19

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting an Address for the Alternative NTP Server (ntp -d alternativeserver)

Setting an Address for the Alternative NTP Server (ntp -d alternativeserver)


The ntp -d alternativeserver command is used to set an address for the alternative NTP server.


ipmcset -t ntp -d alternativeserver -v addr





addr Indicates the address of the alternative NTP server. The value can be any of the following:
  • IPv4 address
  • IPv6 address
  • Domain name

Usage Guidelines

  • The iBMC version earlier than V312 supports only the Linux NTP servers.
  • iBMC V312 and later versions support Linux and Windows NTP servers.


# Set the alternative NTP server address to 2001::1234.

iBMC:/-> ipmcset -t ntp -d alternativeserver -v 2001::1234
Set NTP alternative server (2001::1234) successfully.

# Query NTP information.

iBMC:/->ipmcget -d ntpinfo
Status             : enabled
Mode               : manual
Preferred Server   :
Alternative Server : 2001::1234
Synchronize        : successful
Auth Enable        : disabled
Group Key          : not imported
Updated: 2019-08-01

Document ID: EDOC1000157052

Views: 132863

Downloads: 259

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next