No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro E9000 Server iBMC (V250 to V259) User Guide 20

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the SNMP Trap Port Number (trap -d port)

Setting the SNMP Trap Port Number (trap -d port)

Function

The trap -d port command is used to set the SNMP trap port number of the iBMC.

Format

ipmcset -t trap -d port -v <destination> <portvalue>

Parameters

Parameter Description Value

destination

Identifies an SNMP trap destination.

Value range: 1 to 4

portvalue

Specifies the SNMP trap port number.

Value range: 1 to 65535

Default value: 162

Usage Guidelines

The switch module does not support the command.

Example

# Set the port number for SNMP trap destination 1 to 1024.

iBMC:/->ipmcset -t trap -d port -v 1 1024
Set trap dest1 port successfully.
Translation
Download
Updated: 2019-11-19

Document ID: EDOC1000157052

Views: 152397

Downloads: 271

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next