No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

E9000 Server Compute Node and Switch Module iBMC (V250 to V259) User Guide 17

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying and Setting the Status of the Password Complexity Check Function (passwordcomplexity)

Querying and Setting the Status of the Password Complexity Check Function (passwordcomplexity)

Function

The passwordcomplexity command is used to query and set the status of the password complexity check function.

Format

ipmcget [-t user] -d passwordcomplexity

ipmcset [-t user] -d passwordcomplexity -v <enabled | disabled>

Parameters

Parameter Description Value
enabled Enables the password complexity check function. -
disabled Disables the password complexity check function. -

Usage Guidelines

  • The password complexity check function is enabled by default.
  • Disabling the password complexity check function reduces the system security. Set the parameter with caution.
  • If password complexity check is disabled, the password cannot be empty or exceed 20 characters.
  • If password complexity check is enabled, the password must meet the following requirements:

    • Contain 8 to 20 characters
    • Contain at least a space or one of the following special characters:

      `~!@#$%^&*()-_=+\|[{}];:'",<.>/?

    • Contain at least two types of the following characters:

      • Uppercase letters A to Z
      • Lowercase letters a to z
      • Digits 0 to 9
    • Cannot be the same as the user name or the user name in reverse order.
    • Have at least two new characters when compared with the previous password.
NOTE:

In addition to the password complexity check, the iBMC also checks for weak passwords for security purposes. (You can run the ipmcset -t user -d weakpwddic -v export command to export the weak passwords from the weak password dictionary.)

Only the administrators can set the status of the password complexity check function.

Example

# Query the status of the password complexity check function.

iBMC:/->ipmcget -d passwordcomplexity
Password complexity check state : enabled

# Enable the password complexity check function.

iBMC:/->ipmcset -d passwordcomplexity -v enabled
Set password complexity check state successfully.
Translation
Download
Updated: 2019-02-28

Document ID: EDOC1000157052

Views: 96821

Downloads: 231

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next