No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro E9000 Server iBMC (V250 to V259) User Guide 19

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Upgrading the Firmware (upgrade)

Upgrading the Firmware (upgrade)


The upgrade command is used to upgrade the server firmware, which includes the iBMC, BIOS, SD card firmware, and complex programmable logic device (CPLD).


ipmcset -d upgrade -v <filepath>


Parameter Description Value

Specifies the absolute path of the upgrade file.

Only the xxx.hpm file is supported.
Example value: /tmp/image.hpm.

Usage Guidelines

If the iBMC version is earlier than V256, run the ipmcset -d reset command to restart the iBMC before you use this command to upgrade the firmware (iBMC/CPLD/BIOS).

Before running this command, use a file transfer tool that supports SFTP, for example WinSCP, to transfer the upgrade file to the specified directory (for example /tmp) of the iBMC file system.

After the iBMC or SD card controller upgrade is complete, the iBMC restarts automatically for the upgrade to take effect.


# Upgrade the firmware.

iBMC:/->ipmcset -d upgrade -v /tmp/image.hpm
Please make sure the iBMC is working while upgrading!
Update successfully.
Updated: 2019-08-01

Document ID: EDOC1000157052

Views: 132880

Downloads: 259

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next