No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

E9000 Server Compute Node and Switch Module iBMC (V250 to V259) User Guide 17

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying and Setting SNMPv3 Authentication and Privacy Protocols (trap -d protocol)

Querying and Setting SNMPv3 Authentication and Privacy Protocols (trap -d protocol)

Function

The trap -d protocol command is used to query and set the authentication and privacy protocols for SNMPv3 trap.

Format

ipmcget -t trap -d protocol

ipmcset -t trap -d protocol -v <option>

Parameters

Parameter Description Value
option Specifies the authentication and privacy protocols for SNMPv3 trap.

Value:

  • 1: The authentication protocol is MD5, and the privacy protocol is DES.
  • 2: The authentication protocol is MD5, and the privacy protocol is AES.
  • 3: The authentication protocol is SHA, and the privacy protocol is DES.
  • 4: The authentication protocol is SHA, and the privacy protocol is AES.

Default value: 4

Usage Guidelines

The switch module does not support the command.

  • The same authentication and privacy protocols must be configured on the SNMP server.

  • The configured authentication and privacy protocols also apply to SNMPv3 at the same time.
  • Using MD5 and DES may pose security risks. You are advised to use SHA and AES.

Example

# Set the SNMPv3 trap authentication and privacy protocols.

iBMC:/->ipmcset -t trap -d protocol -v 4
Set SNMP trap authentication and privacy protocol successfully.

# Query the SNMPv3 trap authentication and privacy protocols.

iBMC:/->ipmcget -t trap -d protocol
Trap protocol      :
   Authentication  : SHA
   Privacy         : AES
Translation
Download
Updated: 2019-02-28

Document ID: EDOC1000157052

Views: 96396

Downloads: 231

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next