No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro E9000 Server iBMC (V250 to V259) User Guide 20

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Importing the CRL File (crl)

Importing the CRL File (crl)


The crl command is used to import the certificate revocation list (CRL) file, which is used to verify the integrity of the upgrade package.


ipmcset -d crl -v <localpath/URL> <type>


Parameter Description Value


Specifies the directory in which the CRL file is imported on the iBMC.


The file must be in the *.crl format and smaller than 100 KB.

Absolute directory on the iBMC, for example, /tmp/cms.crl.


Specifies the URL of the CRL file to be imported.

The format is as follows:



  • protocol must be https, sftp, cifs, scp, or nfs.
    • The iBMC supports only Server Message Block (SMB) V1.0.
    • If the NFS protocol is used, the path cannot contain username:password@. If other protocols are used, the path must contain username:password@.
  • username indicates the user name for logging in to the target server.
  • password indicates the password for logging in to the target server.
  • IP:[port] indicates the IP address and port number of the target server.
  • directory/filename indicates the absolute directory in which the CRL file is stored on the target server.

Example value: https://root:Huawei12#$@


Specifies the CRL file type.

It has a fixed value of 1.

Usage Guidelines

This command is available only for V5 servers.

Before running this command, use a file transfer tool supporting SFTP (for example WinSCP) to transfer the file to be imported to the specified directory (for example /tmp) of the iBMC file system.


# Import the CRL file.

iBMC:/-> ipmcset -d crl -v /tmp/cms.crl 1
Import CRL file successfully.
Updated: 2019-11-19

Document ID: EDOC1000157052

Views: 152407

Downloads: 271

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next