No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro E9000 Server iBMC (V250 to V259) User Guide 19

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling or Disabling the CLP Notimeout Function

Enabling or Disabling the CLP Notimeout Function

Function

The notimeout command is used to enable or disable the CLP notimeout function. The setting takes effect only after you exit and log in to iBMC CLI again.

By default, the CLP notimeout function is disabled.

Format

ipmcset -d notimeout -v <enabled | disabled>

Parameters

Parameter Description Value
enabled Enables the CLP notimeout function.

-

disabled Disables the CLP notimeout function.

-

Usage Guidelines

None

Example

# Enable the CLP notimeout function.

iBMC:/->ipmcset -d notimeout -v enabled
Set no timeout state successfully.

# Disable the CLP notimeout function.

iBMC:/->ipmcset -d notimeout -v disabled
Set no timeout state successfully.
Translation
Download
Updated: 2019-08-01

Document ID: EDOC1000157052

Views: 133985

Downloads: 259

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next