No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro E9000 Server iBMC (V250 to V259) User Guide 20

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Exporting the Weak Password Dictionary (weakpwddic -v export)

Exporting the Weak Password Dictionary (weakpwddic -v export)


The weakpwddic -v export command is used to export the weak password dictionary of the iBMC.


ipmcset -t user -d weakpwddic -v export <filepath | file_URL>






Specifies the local directory in which the weak password dictionary is stored.

Absolute directory on the iBMC, for example, /tmp/weakpwddictionary.


Specifies the remote path of the weak password dictionary.

The format is as follows:



  • protocol must be https, sftp, cifs, scp, or nfs.
    • The iBMC supports only Server Message Block (SMB) V1.0.
    • If the NFS protocol is used, the path cannot contain username:password@. If other protocols are used, the path must contain username:password@.
  • username indicates the user name for logging in to the target server.
  • password indicates the password for logging in to the target server.
  • IP:[port] indicates the IP address and port number of the target server.
  • directory/filename indicates the absolute directory in which the weak password dictionary is stored on the target server.

Example value: https://root:Huawei12#$@ weakpwddictionary

Usage Guidelines

This command is available only for V5 servers.

To view the weak password dictionary, use a file transfer tool supporting SFTP (for example WinSCP) to transfer the weakpwddictionary file from /tmp to the local PC.


# Export the weak password dictionary.

iBMC:/-> ipmcset -t user -d weakpwddic -v export /tmp/weakpwddictionary
Export weak password dictionary successfully.
Updated: 2019-11-19

Document ID: EDOC1000157052

Views: 152444

Downloads: 271

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next