No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro E9000 Server iBMC (V250 to V259) User Guide 19

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying SNMP Trap Destination Information (trap -d trapiteminfo)

Querying SNMP Trap Destination Information (trap -d trapiteminfo)


The trap -d trapiteminfo command is used to query SNMP trap destination information, which includes the SNMP trap state, IP address, and port number.


ipmcget -t trap -d trapiteminfo



Usage Guidelines

The switch module does not support the command.


# Query SNMP trap destination information.

iBMC:/->ipmcget -t trap -d trapiteminfo

TrapItem Num    | state      | port       | alert address
1               | enabled    | 1024       |
2               | disabled   | 162        |
3               | disabled   | 162        |
4               | disabled   | 162        |
Updated: 2019-08-01

Document ID: EDOC1000157052

Views: 132578

Downloads: 259

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next