No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro E9000 Server iBMC (V250 to V259) User Guide 19

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying and Setting BIOS Print Enablement Status (biosprint)

Querying and Setting BIOS Print Enablement Status (biosprint)


The biosprint command is used to query and set BIOS debug. If BIOS debug is enabled, debug information will be sent to the serial port during the POST process.


ipmcget -t maintenance -d biosprint

ipmcset -t maintenance -d biosprint -v <option>


Parameter Description Value
<option> Specifies the operation to be performed.
  • 1: forcibly enables BIOS debug.
  • 2: applies the setting on the BIOS.

Usage Guidelines

The switch modules do not support the command.


# Enable BIOS print.

iBMC:/->ipmcset -t maintenance -d biosprint -v 1
WARNING: Setting BIOS debug info enbale will make system start slow. Do you want to continue?[Y/N]y
Set BIOS debug info enable successfully

# Query the BIOS print status.

iBMC:/->ipmcget -t maintenance -d biosprint
BIOS debug info enable
Updated: 2019-08-01

Document ID: EDOC1000157052

Views: 133395

Downloads: 259

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next