No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


E9000 Server Compute Node and Switch Module iBMC (V250 to V259) User Guide 17

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying and Setting the Protocol Type (syslog -d protocol)

Querying and Setting the Protocol Type (syslog -d protocol)


The syslog -d protocol command is used to query and set the protocol used to send syslog messages.


ipmcget -t syslog -d protocol

ipmcset -t syslog -d protocol -v <option>


Parameter Description Value
option Specifies the protocol used.
  • 1: UDP

    UDP is a connectionless protocol that does not set up a dedicated end-to-end connection before data is transmitted.

  • 2: TCP

    TCP is a connection-oriented protocol that sets up a reliable end-to-end connection before data is transmitted.

  • 3: TLS

    TLS is a connection-oriented protocol that ensures confidentiality and integrity of the data transmitted.

Usage Guidelines



# Use TLS to transfer syslog messages..

iBMC:/-> ipmcset -t syslog -d protocol -v 3
Set syslog protocol successfully.

# Query the protocol used to transfer syslog messages.

iBMC:/-> ipmcget -t syslog -d protocol
Syslog protocol: TLS
Updated: 2019-02-28

Document ID: EDOC1000157052

Views: 95470

Downloads: 229

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next