Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x100000B7 Soft-Start Circuit Undervoltage (Mainboard, Major Alarm)
Description
Alarm message:
Soft-start circuit voltage at arg1 detection point is undervoltage (BN: arg2).
From iBMC V316, the CPU and disk alarms will also include the SN and BOM code and the mainboard and memory alarms will also include the BOM code.
This alarm is generated when the voltage at the detection point arg1 of the soft-start circuit is lower than the minor threshold.
Alarm object: mainboard
Parameters
| Name | Meaning |
|---|---|
arg1 |
Voltage detection point. For example, 12V, or a value from 12V_1 to 12V_5. |
arg2 |
BOM code. |
Procedure
- Replace the mainboard. Then, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 2.
- Contact technical support engineer.
