Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x06000007 RAID Controller Card MCE/AER Error (RAID Card, Critical Alarm)
Description
Alarm message:
The arg3 RAID controller card arg1 triggered an uncorrectable error, arg2 (SN: arg4, BN: arg5).
This alarm is generated when an uncorrectable error occurs on a RAID controller card.
Alarm object: RAID card
Parameters
| Name | Meaning |
|---|---|
arg1 |
Slot number of the RAID controller card. |
arg2 |
Error code of the alarm. |
arg3 |
Front I/O module or compute module and its slot number, for example, FM or CMn. |
arg4 |
SN of the RAID controller card. |
arg5 |
BOM code. |
Impact on the System
The RAID controller card may run unstably or be faulty. The system may even stop responding.
Possible Causes
- The RAID controller card is faulty.
- The BBU of the RAID controller card is faulty.
- The mainboard is faulty.
Procedure
- Remove and reinstall the RAID controller card. Then, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 2.
- Replace the RAID controller card. Then, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 3.
- Replace the BBU of the RAID controller card. Then, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 4.
- Replace the mainboard. Then, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 5.
- Contact technical support.
