Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x29000027 Optical Module Speed Mismatches NIC Speed (Port, Major Alarm)
Description
Alarm message:
Network arg1 [arg2] arg3 optical module transmission speed does not match the speed supported by the NIC.
This alarm is generated when the optical module speed does not match the speeds supported by the network interface card.
Alarm object: port
Attribute
Alarm ID |
Alarm Severity |
Auto Clear |
|---|---|---|
0x29000027 |
Major |
Yes |
Parameters
| Name | Meaning |
|---|---|
arg1 |
NIC name, for example, NIC 1, PCIe Card 5, or LOM. |
arg2 |
Type of the NIC, for example, (NIC) or (FC). |
arg3 |
Network port number, for example, port 1. |
Procedure
- Replace the optical module. Then, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 2.
- Contact technical support engineer.
