Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x08000001 PCIe Card MCE/AER Fault (PCIe Card, Critical Alarm)
Description
Alarm message:
The [arg1] PCIe card arg2 (arg3) triggered an uncorrectable error, arg4.
This alarm is generated when an uncorrectable error occurs on a PCIe card.
Alarm object: PCIe card
Parameters
| Name | Meaning |
|---|---|
arg1 |
Location of the PCIe card. For example, front or rear. |
arg2 |
Slot number of the PCIe card, for example, 1 or 2. |
arg3 |
Type of the PCIe card, for example, M60 GPU. |
arg4 |
Error code of the alarm. |
Impact on the System
Services related to the PCIe card are affected, and the system may even stop responding.
Possible Causes
- The PCIe card is faulty.
- The mainboard or PCIe riser card holding the PCIe card is faulty.
Procedure
- Remove and reinstall the PCIe card. Then, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 2.
- Replace the PCIe card. Then, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 3.
- Replace the mainboard or PCIe riser card holding the PCIe card. Then, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 4.
- Contact technical support engineer.
