Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x0D000003 NIC Overtemperature (NIC, Minor Alarm)
Description
Alarm message:
The NIC arg1 temperature (arg2 degrees C) exceeds the overtemperature threshold (arg3 degrees C).
This alarm is generated when the PCIe card temperature exceeds the overtemperature minor threshold.
Alarm object: NIC
Parameters
| Name | Meaning |
|---|---|
arg1 |
Serial number of the NIC. |
arg2 |
Current reading of the sensor. |
arg3 |
Alarm threshold. |
Possible Causes
A fan module is faulty.
The equipment room temperature exceeds the normal range.
The air inlet or outlet is blocked.
A NIC is faulty.
Procedure
- Check whether there are fan module alarms.
- Replace the fan module. After 5 minutes, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 3.
- Check whether the equipment room temperature exceeds the normal range.
- Reduce the equipment room temperature to the normal range. After 5 minutes, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 5.
- Check whether the air inlet or outlet of the server is blocked.
- Clear the blockage. After 5 minutes, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 7.
- Replace the NIC. Then, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 8.
- Contact technical support.
