Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x0300000B Power Supply Prewarning (PSU, Minor Alarm)
Description
Alarm message:
PSU arg1 predictive failure (SN: arg2, BN: arg3).
From iBMC V328, the RAID controller card and PSU alarms will also include the SN and BOM code, and the fan alarms will also include the BOM code.
This alarm is generated when the PSU is present but the voltage is abnormal.
Alarm object: PSU
Procedure
- Replace the PSU. Then, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 2.
- Contact technical support engineer.
