Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x00000011 CPU Self-Test Failed (CPU, Critical Alarm)
Description
Alarm message:
CPU arg1 self-test failed (SN: arg2, BN: arg3).
From iBMC V316, the CPU and disk alarms will also include the SN and BOM code and the mainboard and memory alarms will also include the BOM code.
This alarm is generated when an error occurs in the CPU self-test during startup.
Alarm object: CPU
Procedure
- Switch the CPU with a functioning CPU in the same chassis, and check whether the alarm is still generated for this CPU.
- Replace the CPU. Then, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 4.
- Replace the mainboard. Then, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 4.
- Contact technical support engineer.
