Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x2900002F NIC Port Linkdown (Port, Major Alarm)
Description
Alarm message:
arg1 [arg2] arg3 disconnected.
This alarm is generated when the NIC port linkdown occurs.
Alarm object: Port
iBMC V3.01.12.21 and later support this alarm.
Attribute
Alarm ID |
Alarm Severity |
Auto Clear |
|---|---|---|
0x2900002F |
Major |
Yes |
Parameters
Name |
Meaning |
|---|---|
arg1 |
NIC name, for example, "NIC", "PCIe Card", "LOM", or "iBMC dedicated port". |
arg2 |
Type of the NIC, for example, (NIC) or (FC). |
arg3 |
Network port number, for example, "port 1". |
Impact on the System
The network port services will be interrupted.
Possible Causes
The network cable is not connected or the port of the peer device is not connected.
Procedure
- Remove and reconnect the network cable. Then check whether the alarm is cleared.
- If yes, no further action is required.
- If no, go to 2.
- Check whether the network cable is connected to the peer device.
- Connect the network cable to the peer device port correctly. Then check whether the alarm is cleared.
- If yes, no further action is required.
- If no, go to 4.
- Check whether the peer device works properly.
- Replace the faulty peer device. Then check whether the alarm is cleared.
- If yes, no further action is required.
- If no, go to 6.
- Contact technical support engineer.
