Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x05000001 Drive Backplane Power Failure (Drive Backplane, Major Alarm)
Description
Alarm message:
Power supply to [arg1] drive backplane [arg2] failed (SN: arg3, BN: arg4).
From iBMC V370, this alarm also includes the serial number and BOM code of the drive backplane.
This alarm is generated when the power supply to the drive backplane is abnormal.
Alarm object: drive backplane
Parameters
| Name | Meaning |
|---|---|
arg1 |
Location of the drive backplane. For example, rear, inner, or front. |
arg2 |
Power supply type. For example, 5V or 12V. |
arg3 |
Drive backplane serial number. |
arg4 |
BOM code. |
Impact on the System
The backplane drive cannot work properly. As a result, related services may run abnormally or data may be lost.
Possible Causes
- The cable between the drive backplane and the mainboard is faulty.
- The drive backplane is faulty.
Procedure
- Completely power off the server by disconnecting the AC power cables, and remove and reconnect the cable of the drive backplane. After the server is powered on, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 2.
- Completely power off the server, and replace the cable of the drive backplane. After the server is powered on, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 3.
- Completely power off the server, and replace the drive backplane. After the server is powered on, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 4.
- Contact technical support engineer.
