Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x1A000031 Insufficient NAND Flash Reserved Blocks (BMC, Major Alarm)
Description
Alarm message:
The remaining reserved blocks of the NAND flash are less than arg1.
This alarm is generated when the number of reserved blocks available for the NAND flash is less than the threshold.
Alarm object: BMC
Only iBMC V296 to V369 support this alarm.
Attribute
Alarm ID |
Alarm Severity |
Auto Clear |
|---|---|---|
0x1A000031 |
Major |
No |
Parameters
| Name | Meaning |
|---|---|
arg1 |
Threshold of the number of reserved NAND flash blocks available, for example, 10. |
Procedure
- Replace the mainboard. Then, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 2.
- Contact technical support.
