Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x02000021 Failed to Read Hard Disk VPD Information (Disk, Minor Alarm)
Description
Alarm message:
Failed to obtain data of the arg1 disk arg2 VPD information (SN: arg3).
From iBMC V316, the CPU and disk alarms will also include the SN and BOM code and the mainboard and memory alarms will also include the BOM code.
This alarm is generated when the system failed to read the hard disk VPD information.
Alarm object: disk
Parameters
| Name | Meaning |
|---|---|
arg1 |
Hard disk location, for example, rear. |
arg2 |
Hard disk name, for example, disk0, disk1, diskA1, or diskB1. |
arg3 |
Disk serial number. |
Possible Causes
- The hard disk is damaged or has poor contact with its slot.
- The hard disk is faulty.
- The drive backplane is faulty.
Procedure
- Restart the iBMC. Then, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 2.
- Remove and reinstall the power cable or board. Then, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 3.
- Replace the hard disk. Then, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 4.
- Replace the drive backplane. Then, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 5.
- Contact technical support engineer.
