Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x06000027 Initialization of the RAID Controller Card Abnormal (RAID Card, Major Alarm)
Description
Alarm message:
Initialization of arg2 RAID controller card arg1 is abnormal (SN: arg3, BN: arg4).
From iBMC V328, the RAID controller card and PSU alarms will also include the SN and BOM code, and the fan alarms will also include the BOM code.
This alarm is generated when the initialization of the RAID controller card is abnormal.
Alarm object: RAID card
Parameters
| Name | Meaning |
|---|---|
arg1 |
Slot number of the RAID controller card. |
arg2 |
Front I/O module or compute module and its slot number, for example, FM or CMn. |
arg3 |
SN of the RAID controller card. |
arg4 |
BOM code. |
Possible Causes
- The RAID controller card is faulty.
- The BBU of the RAID controller card is faulty.
- The mainboard is faulty.
Procedure
- Reseat the RAID controller card. Then, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 2.
- Replace the RAID controller card. Then, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 3 .
- Replace the BBU of the RAID controller card. Then, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 5.
- Replace the mainboard. Then, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 5.
- Contact technical support engineer.
