Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x1000000B System 12 V Overvoltage (Mainboard, Major Alarm)
Description
Alarm message:
Mainboard voltage (arg1 V) at 12 V detection point arg3 exceeds the overvoltage threshold (arg2 V) arg4.
This alarm is generated when the voltage of the 12 V detection point on the mainboard exceeds the overvoltage major threshold.
Alarm object: mainboard
Parameters
| Name | Meaning |
|---|---|
arg1 |
Current reading of the sensor. |
arg2 |
Alarm threshold. |
arg3 |
12 V detection point. For example, 1, 2, 3, or 4. |
arg4 |
BOM code. |
Procedure
- Replace the mainboard. Then, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 2.
- Contact technical support engineer.
