Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x02000013 Hard Disk MCE/AER Error (Disk, Critical Alarm)
Description
Alarm message:
The [arg1] disk arg2 triggered an uncorrectable error, arg3 (SN: arg4, BN: arg5).
From iBMC V316, the CPU and disk alarms will also include the SN and BOM code and the mainboard and memory alarms will also include the BOM code.
This alarm is generated when a hard disk triggered an uncorrectable error.
Alarm object: disk
Attribute
Table 6-1
Alarm ID |
Alarm Severity |
Auto Clear |
|---|---|---|
0x02000013 |
Critical |
Yes |
Parameters
| Name | Meaning |
|---|---|
arg1 |
Location of the hard disk. For example, front or rear. |
arg2 |
Slot number of the hard disk. |
arg3 |
Error code of the alarm. |
arg4 |
Disk serial number. |
arg5 |
BOM code. |
Procedure
- Remove and reinstall the hard disk. Then, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 2.
- Replace the faulty hard disk. Then, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 3.
- Replace the drive backplane. Then, check whether the alarm is cleared.
If yes, no further action is required.
If no, go to 4.
- Contact technical support.
