No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Disk Encryption User Guide

OceanStor Dorado V3 Series V300R001

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. This document introduces how to install and configure key management servers connected to the storage systems that use self-encrypting disks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a Key Management Server

Installing a Key Management Server

This section describes how to install a key management server.


  • To avoid personal injury or damage to the hardware, always arrange at least two persons to lift and install a key management server.
  • Both of the two key management servers need to be installed.


  1. Determine the installation location.

    A key management server is a 2 U device. In the rack, determine proper installation locations for the two key management servers.

  2. Wear ESD gloves and ESD wrist straps.
  3. Unpack the key management server.
  4. Install the side supports into the rack, as shown in Figure 3-6.

    Figure 3-6 Installing side supports

  5. Install external supports into the key management server, as shown in Figure 3-7.

    Figure 3-7 Installing external supports

  6. Slide the key management server into the rack, and secure it using provided nuts and bolts, as shown in Figure 3-8.

    Figure 3-8 Installing a key management server

  7. Confirm that both sides of the key management server are fastened.
  8. Repeat Installing a Key Management Server to Installing a Key Management Server to install the other key management server.
Updated: 2018-11-01

Document ID: EDOC1000159246

Views: 32875

Downloads: 199

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next