No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Disk Encryption User Guide

OceanStor Dorado V3 Series V300R001

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. This document introduces how to install and configure key management servers connected to the storage systems that use self-encrypting disks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
The Storage System Can Properly Connect with the Key Management Server, But the Key Cannot Be Created

The Storage System Can Properly Connect with the Key Management Server, But the Key Cannot Be Created

Question

The storage system can properly connect with the key management server, but the key cannot be created. Meanwhile, in the message log of the storage system, get uuid fail... may be displayed.

Answer

  1. Log in to the key management server web interface.
  2. Check whether Username Field in Client Certificate of the KMIP server is OU (Organization Unit).

    1. Choose Device > Key Server.
    2. In the Cryptographic Key Server area, select the KMIP server and click Properties.
    3. In the Authentication Settings area, check whether Username Field in Client Certificate is OU (Organization Unit).
      • If yes, go to next step.
      • If no, click Edit and set Username Field in Client Certificate to OU (Organization Unit), and click Save. Go to the next step.

  3. Check whether a local user named as Storage is created.
  4. Choose Security > Users & Groups > Local Users & Groups.
  5. In the Local Users area, check whether a local user whose Username is Storage exists.

    • If yes, create the key on the storage system side.
    • If no, create a local user whose Username is Storage, then create the key on the storage system side.

Translation
Download
Updated: 2018-11-01

Document ID: EDOC1000159246

Views: 33072

Downloads: 199

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next