No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Disk Encryption User Guide

OceanStor Dorado V3 Series V300R001

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. This document introduces how to install and configure key management servers connected to the storage systems that use self-encrypting disks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Cluster Management

Cluster Management

Cluster management includes cluster member deletion and other relevant operations.

Deleting a Cluster Member

After you delete a cluster member, the configurations of both key management servers will not be synchronized.

Procedure
  1. Enable the maintenance mode on both key management servers in the cluster. For details, see Enabling the Maintenance Mode of Key Management Servers.
  2. Log in to the web interface of either key management server as an officer.
  3. Click the Replication tab.

    Cluster member information is displayed.

  4. Select the member that you want to remove and click Delete.

    A dialog box is displayed for confirmation.

  5. Click OK.
Follow-up Procedure

If you add the member that has been deleted to the cluster again, the key management servers will not synchronize their data automatically. You must back up the source key management server's configurations, synchronize the configurations from the source to the target key management server, and add the member to the cluster again. For details, see Backing Up Configurations of the Source Key Management Server and Restoring the Target Key Management Server Configuration.

Translation
Download
Updated: 2018-11-01

Document ID: EDOC1000159246

Views: 32924

Downloads: 199

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next