No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Disk Encryption User Guide

OceanStor Dorado V3 Series V300R001

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. This document introduces how to install and configure key management servers connected to the storage systems that use self-encrypting disks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Powering On a Key Management Server

Powering On a Key Management Server

After connecting network cables of the key management server, connect power cables and power on the key management server.

Prerequisites

  • You have installed and connected network cables of the key management servers.
  • You have prepared the power cables.
  • You need to power on both of the two key management servers.

Procedure

  1. Wear ESD gloves and ESD wrist straps.
  2. Unpack power cables and adapter cables.
  3. Insert one end of the power cable to the power socket on the rear of the key management server, and the other end to the external power supply.
  4. If the external power supply is not turned on, turn it on.

    NOTE:

    Key management servers have no power switches. After their power cables are connected and the external power supplies are turned on, key management servers will automatically power on. The LCD on the key management server will flash slowly for approximately one minute and display the initialization information. The startup of a key management server takes several minutes. After the startup is complete, the LCD displays a message indicating that.

  5. Repeat Powering On a Key Management Server to Powering On a Key Management Server to power on the other key management server.
Translation
Download
Updated: 2018-11-01

Document ID: EDOC1000159246

Views: 33006

Downloads: 199

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next