No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Disk Encryption User Guide

OceanStor Dorado V3 Series V300R001

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. This document introduces how to install and configure key management servers connected to the storage systems that use self-encrypting disks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Can I Do If I Cannot Log In to the Key Management Server Web Interface Through the Serial Port?

What Can I Do If I Cannot Log In to the Key Management Server Web Interface Through the Serial Port?

Question

What can I do if I cannot log in to the key management server web interface through the serial port?

Answer

  1. Log in to the key management server management interface through the serial port as a security officer.
  2. Check whether the Used for web server option is selected.

    1. Select SSL Certificate and press Enter.

      The Warning dialog box is displayed.

    2. Click OK.

      The SSL Certificate is displayed, as shown in Figure 3-94.

      Figure 3-94 The CA certificate interface

    3. Check whether the Use for web server option is selected.
      • If yes=>go to the next step.
      • If no=>select this option and go to the next step.

  3. Check the status of the HTTP service.

    1. Select Service and press Enter.

      The Service interface is displayed, as shown in Figure 3-95.

      Figure 3-95 The service interface

    2. Check whether HTTPS is in Running status.
      • If the status is Stopped, select Start and press Enter.
      • If the status is Running, contact Huawei technical support engineers.

Translation
Download
Updated: 2018-11-01

Document ID: EDOC1000159246

Views: 32899

Downloads: 199

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next