Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking After Commissioning
Table 4-14 lists the commissioning checklist.
Table 4-14 Commissioning checklist
Check Item |
Actual Result |
|---|---|
No oil stain exists on the copper pipe thermal insulation foam or bottom plate, or it has been cleaned. |
□ Passed □ Failed |
The needle valve plug is secured (torque of 0.45±0.05 N·m), and valve bonnet is tightened. |
□ Passed □ Failed |
The foreign matter inside the water pan and bottom plate is cleaned up. |
□ Passed □ Failed |
The air filter is correctly installed according to the air flow direction on the frame. |
□ Passed □ Failed |