(Optional) Connecting the Humidifier Water Inlet Pipe

Context

The humidifier water inlet pipe can be connected using a hose or a rigid pipe.

Figure 3-35 Connecting a water inlet pipe

(1) Connector with inner screw threads: G 1/2 inch, delivered with the water inlet pipe for the smart cooling product	(2) Rigid pipe conversion adapter: G 1/2 inch; connected to a rigid pipe with outer screw threads	(3) Rigid pipe: made of PP-R or other materials
(4) Pagoda connector: G 1/2 inch; connected to a pagoda connector with outer screw threads	(5) Hose clamp	(6) Hose: made of EPDM or other materials

The object shown in the dotted line box is the water inlet pipe connector with inner screw threads delivered with smart cooling products. The hose clamp as shown by (5) in the preceding figure is provided in standard configuration. Other parts are not provided and need to be purchased.

Bottom Pipe Routing

1. Straighten the water inlet pipe delivered with the smart cooling product, and route it from the inside to the outside through the water inlet hole at the bottom of the smart cooling product.
   Figure 3-36 Downward routing of the water inlet pipe
   

   The other end is a reserved G 1/2 inch connector with inner screw threads. Connect the other end to a hose or rigid pipe based on site requirements.

2. Clean the engineering pipes before connecting the water inlet pipe to the engineer pipe to avoid impurities entering into the humidifier.
3. Connect the water inlet pipe to the engineer pipe and wrap the pipe with thermal insulation foam.

Top Pipe Routing

When routing pipes from the top, do not route the pipes over servers or other devices to protect them from being affected by pipe leaks.

1. Straighten the water inlet pipe delivered with the smart cooling product, and route it from the inside to the outside through the water inlet hole on the top of the smart cooling product.
   Figure 3-37 Upward routing of the water inlet pipe
   
   • The other end is a reserved G 1/2 inch connector with inner screw threads. Connect the other end to a hose or rigid pipe based on site requirements.
   • Secure the water inlet pipe inside the cabinet to the left post of the cabinet using cable ties.

2. Clean the engineering pipes before connecting the water inlet pipe to the engineer pipe to avoid impurities entering into the humidifier.
3. Connect the water inlet pipe to the engineer pipe and wrap the pipe with thermal insulation foam.