Preparations and WebUI Login

Procedure

1. Connect a network cable between the PC network port and the FE port (protected by a security mechanism) on smart cooling product.
2. On the home screen, choose Settings > Comm Settings > IP Settings. Change IP assigning mode to Manual, and set the IP address, subnet mask and default gateway.
3. Configure the PC IP address and the smart cooling product IP address in the same network segment.

   If the smart cooling product IP address is 192.168.0.10, subnet mask is 255.255.255.0, and default gateway is 192.168.0.1, set the PC IP address to 192.168.0.11, subnet mask to 255.255.255.0, and default gateway to 192.168.0.1.

4. Set LAN parameters.
   • If the smart cooling product connects to a LAN and a proxy server has been selected, perform 4.c and 4.d.
   • If the smart cooling product connects to the Internet, and the PC in a LAN accesses the Internet over a proxy server, do not perform 4.c and 4.d. Otherwise, you will fail to access the ECC800.
   1. Open the Internet Explorer and choose Tools > Internet Options.
   2. Click the Advanced tab and select Use TLS1.1 and Use TLS1.2.
      Figure 5-1 Setting internet options
      
      

   3. (Optional) Click the Connections tab and select LAN settings.
   4. (Optional) Under Proxy server, clear Use a proxy server for your LAN.
      Figure 5-2 Setting proxy server
      
      

   5. Click OK.
5. Log in to the WebUI of the smart cooling product.
   1. Enter https://IP address (such as IP address https://192.168.0.10) in the address box of the browser, and then press Enter to enter the WebUI login page.
      Figure 5-3 WebUI login page
      

      If the security certificate is not installed, an alarm will be displayed as Figure 5-4, and tap Continue to this website (not recommended)..

      Figure 5-4 Problem of the security certificate
      

   2. On the login page, enter the preset user name admin and preset password Changeme, select the language, and click Log In.
      • Change the password after your first login.
      • An account is logged out due to timeout if no operation is performed within 10 minutes after system login.