Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing the Transport Fasteners from the Compressor
Procedure
- Loosen the three bolts on the compressor transport fasteners
using a 13# solid wrench.
Figure 3-14 Removing the transport fasteners from the compressor
- Do not remove the bolts directly.
- Put away the removed transport fasteners so that you can reinstall them if the indoor unit is to be transported again in the container scenario.
- Remove the transport fasteners.
- Tighten the bolts on the compressor again to a torque of 12 N•m.
