Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the Smart Cooling Product Cabinet (Without Base)
Procedure
- Determine the position for installing the cabinet. Mark mounting holes based on the drawings, as shown in Figure 3-22.
- Drill a hole in each mounting hole position using a hammer drill.
- Move the cabinet over its castors to the installation position.
- Level and combine the cabinets by referring to Figure 3-18 and Figure 3-19.
- Secure the smart cooling product cabinet to the ground using
the M12 bolts in the fittings bag.
Figure 3-23 Securing a cabinet
- Install sealing plates to the front and rear doors. (Sealing plates are not in the fittings bag of the smart cooling product but supplied by the smart module or purchased independently.)Figure 3-24 Installing sealing plates
