Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Export or Import a Configuration File?
Context
You are advised to use the FAT32 USB flash drive with a capacity no greater than 64 GB. Format the non-FAT32 USB flash drives into FAT32 ones before using them.
You can export parameter configurations for smart cooling product 1 to a USB flash drive. If smart cooling product 2 needs the same parameter configurations, import the configuration file to smart cooling product 2.
Procedure
- Tap on the screen of smart cooling product 1 to enter the Select Path screen, as shown in Figure 7-19.
- Tap the file where the user saves current data in the Select Path dialog box and tap Next. Then tap Confirm in the displayed dialog box.
- After the data is successfully exported, Figure 7-20 is displayed. Click Finish.
- Click to remove the USB flash drive in safe mode.
- Tap on the screen of smart cooling product 2, as shown in Figure 7-21.
- Select the file that needs to be imported and tap Next, as shown in Figure 7-22.
- After you tap Confirm and Next, Figure 7-23 and Figure 7-24 are displayed.
- After the file is imported successfully, Figure 7-25 is displayed. Then tap Finish.
If the file fails to be imported, a failure message will be displayed.
- Tap to remove the USB flash drive.
