Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Import a Certificate and Key?
Prerequisites
You have obtained CA certificate file, local certificate file, and key file into a USB disk that is connected to the USB port located on the side of the screen and has been recognized.
You are advised to use the FAT32 USB flash drive with a capacity no greater than 64 GB. Format the non-FAT32 USB flash drives into FAT32 ones before using them.
- Ensure that the key file has been encrypted using AES128.
- Before using a USB flash drive, ensure that its data has been scanned by antivirus software and is secure.
Procedure
- On the home page, choose , as shown in Figure 7-29.
- Select Client certificate or Server certificate based on the type of the certificate in use.
- Tap Browse... next to Upload CA certificate file.
- Select the CA certificate file to be imported.
- Upload the local certificate file and the key file in turn in the same way.
- Enter Key password and Confirm key password.
- Tap Submit.
- If files are imported successfully, a success message will be displayed.
- If files fail to be imported, the message indicating the cause for failure will be displayed. Rectify the fault according to the message and import files again.
