Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Setting WIFI Parameters
Prerequisites
After connecting the WIFI module of the USB port to the USB port of the smart cooling product display, WIFI Settings can be set.
Procedure
- On the home screen, choose . The screen shown in Figure 4-22 is displayed.
- Set the parameters by referring to Table 4-12.Table 4-12 WiFi settings
Parameter
Setting Method
WiFi SSID
Set WiFi SSID based on the actual configuration; WiFi SSID is the name used for the WiFi hotspot over which a mobile phone can connect to the smart cooling product.
WiFi Password
Enter the WiFi password when you use a mobile phone to connect to the WiFi. When you enable the WiFi function for the first time, you need to set a password (the WiFi has no preset password).
Enable WiFi
Enable the WiFi function. The default status is Disable.
- Tap Submit.
