No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V300R006C10 Parts Replacement 06

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Internal Cabling for P12E

Internal Cabling for P12E

Internal Cabling for a Storage Node with One RAID Controller Card

NOTE:

Cabling connection example is for reference only.

A storage node supports four rear hard disks if it is configured with one RAID controller card. The following table describes internal cabling for the storage node.
Figure 9-1  Internal cabling for a storage node with four rear hard disks

No.

Description

BOM Number

1 Signal cable for connecting the indicator plate of the right mounting ear to the mainboard (J43)

04051026

2 Signal cable for connecting the front hard disk backplane (J32) to the rear hard disk backplane (J24)

04051053

3 SAS cable for connecting Port A (J28) of the front hard disk backplane to Port A of the RAID controller card on the mainboard

04051018 (LSI SAS3008/3108)

4 SAS cable for connecting Port B (J29) of the front hard disk backplane to Port B of the RAID controller card on the mainboard

04051018 (LSI SAS3008/3108)

5 Signal cable for connecting the front hard disk backplane (J35) to the rear hard disk backplane (J24)

04051053

6 SAS cable for connecting the front hard disk backplane (J31) to the rear hard disk backplane (J3)

04051060

7 Signal cable for connecting the front hard disk backplane (J1) to the mainboard (J1003)

04051052

8 Signal cable for connecting the USB plate of the left mounting ear to the mainboard (J42)

04051006

9 Power cable for connecting the front hard disk backplane (J24) to the mainboard (J30 PWR CONN1)

04150997

10 Power cable for connecting the rear hard disk backplane (J1) to the mainboard (J29 PWR CONN3)

04150448-001

Translation
Download
Updated: 2019-02-25

Document ID: EDOC1000162172

Views: 27844

Downloads: 28

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next