Viewing Information About Paths to Virtual LUNs
Run the following commands to obtain information about logical paths to LUNs virtualized by multipathing:
bash-3.2# luxadm probe
No Network Array enclosures found in /dev/es
Found Fibre Channel device(s):
Node WWN:2100323232323232 Device Type:Disk device
Logical Path:/dev/rdsk/c2t632323210032323206B0E17A00000005d0s2
Node WWN:2100323232323232 Device Type:Disk device
Logical Path:/dev/rdsk/c2t63232321003232320516B53500000004d0s2
bash-3.2#
Run the following commands to obtain information about physical paths to LUNs:
bash-3.2# luxadm display /dev/rdsk/c2t632323210032323206B0E17A00000005d0s2
DEVICE PROPERTIES for disk: /dev/rdsk/c2t632323210032323206B0E17A00000005d0s2
Vendor: HUASY
Product ID: S2600T
Revision: 2102
Serial Num: S2600T129123456789020005
Unformatted capacity: 4096.000 MBytes
Read Cache: Enabled
Minimum prefetch: 0x0
Maximum prefetch: 0x10
Device Type: Disk device
Path(s):
/dev/rdsk/c2t632323210032323206B0E17A00000005d0s2
/devices/scsi_vhci/ssd@g632323210032323206b0e17a00000005:c,raw
Controller /devices/pci@1f,700000/pci@0/fibre-channel@2,1/fp@0,0
Device Address 2003323232323232,1
Host controller port WWN 10000000c96fa383
Class secondary
State ONLINE
Controller /devices/pci@1f,700000/pci@0/fibre-channel@2/fp@0,0
Device Address 2013323232323232,1
Host controller port WWN 10000000c96fa382
Class primary
State ONLINE
bash-3.2#
In the preceding example, we can view information about physical paths to virtual LUNs.