No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
domain-id (OSPFv3)

domain-id (OSPFv3)


The domain-id command sets an OSPFv3 domain ID.

The undo domain-id command restores the default setting.

By default, the domain ID is null.


domain-id { null | domain-id [ type type value value | secondary ] * }

undo domain-id { domain-id [ type type value value ] }


Parameter Description Value
null Specifies the OSPFv3 domain ID to null. -
domain-id Specifies the OSPFv3 domain ID. It can be expressed by an integer or in dotted decimal notation. If the domain ID is expressed by an integer, its value ranges from 0 to 4294967295; it is converted to the dotted decimal notation and carried 1 with 256 when being displayed. If the domain ID is in dotted decimal notation format, it is displayed as originally entered.
type type Specifies the type of the OSPFv3 domain ID. The value is an integer that can be 0005, 0105, 0205, or 8005. The default value is 0005.
value value Specifies the value of the OSPFv3 domain ID type. The value is a hexadecimal number that ranges from 0 to FFFF. The default value is 0.
secondary Indicates the ID of a secondary domain. -


OSPFv3 view

Default Level

2: Configuration level

Usage Guidelines

Generally, the routes that are imported from a PE are advertised as External-LSAs. The routes that belong to different nodes of the same OSPFv3 domain are advertised as Type 3 LSAs (intra-domain routes). This requires that different nodes in the same OSPFv3 domain have the same domain ID.

Two values, 0 and null, of the domain ID indicate different meanings.

The maximum number of secondary domain IDs on each OSPFv3 process is 10. The maximum number of secondary domain IDs may vary with products.

The parameter secondary can be configured only when the primary domain ID is configured. When the undo domain-id command is run, if no parameter is specified, the primary domain ID is deleted.


# Set the VPN domain ID in OSPFv3 VPN extension.

<HUAWEI> system-view
[~HUAWEI] ip vpn-instance huawei
[*HUAWEI-vpn-instance-huawei] ipv6-family
[*HUAWEI-vpn-instance-huawei-af-ipv6] route-distinguisher 100:1
[*HUAWEI-vpn-instance-huawei-af-ipv6] quit
[*HUAWEI-vpn-instance-huawei] quit
[*HUAWEI] ospfv3 1 vpn-instance huawei
[*HUAWEI-ospfv3-1] domain-id 234
Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 88290

Downloads: 405

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next