No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Example for Defining Shortcut Keys

Example for Defining Shortcut Keys

Networking Requirements

The user always uses a command to configure services and query information on any device in a network. The frequent command input brings a low efficiency; therefore, the user requires fast command input and execution.

Configuration Roadmap

The configuration roadmap is as follows:

  1. Define shortcut keys to improve the command input efficiency. For example, define the shortcut key Ctrl+U and associate it with the display ip routing-table command. To view information in the routing table, press the shortcut key Ctrl+U.

  2. Enter Ctrl+U at the prompt [*HUAWEI] to run the defined command and view the execution result.


  1. Define the shortcut key Ctrl+U, associate it with the display ip routing-table command, and run the command.

    <HUAWEI> system-view
    [*HUAWEI] hotkey ctrl_u "display ip routing-table"
    [*HUAWEI] commit

  2. Press Ctrl+U at the prompt of [*HUAWEI] to run the display ip routing-table command.

    [*HUAWEI] display ip routing-table
    Route Flags: R - relay, D - download to fib
    Routing Table : _public_
             Destinations : 7        Routes : 7
    Destination/Mask    Proto  Pre  Cost        Flags NextHop         Interface
   Direct 0    0             D       InLoopBack0
  Direct 0    0             D       InLoopBack0  Direct 0    0             D       InLoopBack0  Direct 0    0             D   MEth0/0/0  Direct 0    0             D       MEth0/0/0  Direct 0    0             D       MEth0/0/0  Direct 0    0             D       InLoopBack0

Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 73797

Downloads: 380

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next