No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ospfv3 peer

display ospfv3 peer


The display ospfv3 peer command displays the qualified OSPFv3 neighbor.


display ospfv3 [ process-id ] peer [ last-nbr-down ]

display ospfv3 [ process-id ] [ area area-id ] peer [ { neighbor-id | hostname hostname } | interface-type interface-number ] [ verbose ]

display ospfv3 [ process-id ] [ area area-id ] peer [ interface-type interface-number | neighbor-id ] resolve-hostname [ verbose ]


Parameter Description Value
process-id Specifies the OSPFv3 process ID. The value is an integer ranging from 1 to 4294967295.
last-nbr-down Display the brief information about the last neighbor that goes Down in an OSPFv3 process. A maximum of the last ten neighbors that go Down can be displayed for each process. -
area area-id Specifies the neighbor of the specific area. The area-id can be a decimal integer or in IPv4 address format. The integer ranges from 0 to 4294967295.
neighbor-id Specifies router-ID of the neighbor. It is in dotted decimal notation.
hostname hostname Displays LSDB information using a hostname. It is a string of 1 to 255 characters.
interface-type interface-number Indicates the type and the number of the interface. -
verbose Displays detailed information of the neighbor of each area. -
resolve-hostname Displays resolved hostname information. -


All views

Default Level

1: Monitoring level

Usage Guidelines



# Display neighbor information about OSPFv3 process 1 on Vlanif10.

<HUAWEI> display ospfv3 1 peer vlanif 10
OSPFv3 Process (1)
Total number of peer(s): 1       
 Peer(s) in full state: 1       
OSPFv3 Area (
Neighbor ID     Pri  State            Dead Time Interface            Instance ID          1  Full/ -          00:00:30  Vlanif10             0

# Display the detailed neighbor information of OSPFv3 process 100 on Vlanif10.

<HUAWEI> display ospfv3 100 peer vlanif 10 verbose
 OSPFv3 Process (100)
 OSPFv3 Area (

 Neighbor, interface address FE80::3D43:0:8C14:1
    In the area via interface Vlanif10
    DR Priority is 1 DR is BDR is
    Options is 0x000013 (-|-|-|-|-|-|R|-|-|E|V6)
    Dead timer due in 00:00:29
    Neighbour is up for 01:08:17
    Database Summary List 0
    Link State Request List 0
    Link State Retransmission List 0
    Neighbour Event: 7
    Neighbour If Id : 0x04
Table 9-82  Description of the display ospfv3 peer command output



OSPFv3 Process

ID of the OSPFv3 process

Total number of peer(s)

Total information of neighbors.

Peer(s) in full state

Number of entries with the neighbor state Full.

OSPFv3 Area

ID of the OSPFv3 area

Neighbor ID

Neighbor ID


Priority of the neighbor switch


State of the neighbor, including Down, Attempt, Init, 2-Way, ExStart, Exchange, Loading, and Full

Dead Time

Dead time of the neighbor


Interface that connects with the neighbor

Instance ID

ID of the instance that the neighbor belongs to


Neighbor ID

interface address

Link address of the the neighbor interface

In the area via interface Vlanif10

Vlanif10 of the neighbor is in Area 1

DR Priority

Priority of DR


Designated Router


Border Area Router


Options of the neighbor

Dead timer due in 00:00:29

The time before the neighbor dies

Neighbour is up for

Duration that the neighbor has been Up.

Database Summary List

Number of packets in the database summary list of the neighbor

Link State Request List

Number of LSAs in the request list of the neighbor

Link State Retransmission List

Number of LSAs in the retransmission list of the neighbor

Neighbour Event

Number of times NFSM (Neighbor Finite State Machine) state changed

Neighbour If Id

Interface ID of the neighbor

Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 70470

Downloads: 376

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next