No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
filter-policy export (OSPFv3)

filter-policy export (OSPFv3)

Function

The filter-policy export command sets the OSPFv3 rules to filter the imported routes.

The undo filter-policy export command restores the default setting.

By default, the imported routes are not filtered.

Format

filter-policy { acl6-number | acl6-name acl6-name | ipv6-prefix ipv6-prefix-name } export [ protocol [ process-id ] ]

undo filter-policy [ acl6-number | acl6-name acl6-name | ipv6-prefix ipv6-prefix-name ] export [ protocol [ process-id ] ]

Parameters

Parameter Description Value
acl6-number Specifies the ACL6 number. The value is an integer ranging from 2000 to 2999.
acl6-name acl6-name Specifies the name of a IPv6 Named ACL. The value is a string of 1 to 32 case-sensitive characters except spaces. The value must start with a letter (case-sensitive).
ipv6-prefix ipv6-prefix-name Specifies the name of the prefix list. The name is a string of 1 to 169 case-sensitive characters except spaces. When double quotation marks are used to include the string, spaces are allowed in the string.
protocol Specifies the protocol from which the route is imported. If the routes of other protocols are imported, you can use the parameter to filter the imported routes. If the parameter is the default one, all imported routes are filtered. It can be bgp, direct, isis, ospfv3, ripng, or static.
process-id Needs to be specified for ripng, isis, or ospfv3. The value is an integer ranging from 1 to 4294967295.

Views

OSPFv3 view

Default Level

2: Configuration level

Usage Guidelines

The filter-policy export command is only valid for the routes that are imported by using the import-route command.

Example

# Filter the imported routes based on the rule defined by ACL6 2002.

<HUAWEI> system-view
[~HUAWEI] ospfv3 1
[*HUAWEI-ospfv3-1] filter-policy 2002 export
Related Topics
Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166501

Views: 52414

Downloads: 339

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next